Keyence SR-X300

Unlike entry-level code readers, the Keyence SR-X300 is built for long-term stable operation in harsh industrial environments, supporting a wide range of applications including automotive parts traceability, electronic component sorting, pharmaceutical packaging inspection, logistics sorting and other high-precision identification scenarios.

It has been widely verified by global manufacturing enterprises, and has become the preferred code reading solution for upgrading intelligent production lines. If you looking for this product, choose Floating Light Automation as your supplier, we have products in stock and offer competitive prices.

Core Technical Specifications & Advantages

· Image Sensor: 1.5 megapixel high-speed global shutter CMOS, supports 1280 × 960 resolution, captures clear images without motion blur even at 300m/min production line speed

· Decoding Speed: Up to 600 codes per second, supports simultaneous decoding of up to 200 different codes in a single field of view, greatly improving production line efficiency

· AI Decoding Algorithm: Self-learning damage code identification function, can accurately decode DPM codes with 30% or less damage, uneven reflection, blurred edges, and the recognition rate reaches over 99.8%

· Communication Interface: Standard Ethernet TCP/IP, USB 2.0, RS-232C, supports PROFINET, EtherNet/IP industrial protocol, seamlessly connects with mainstream PLC and MES systems

· Environmental Adaptability: IP65 rated housing, working temperature range 0-50°C, vibration resistance 10-150Hz 10G, resistant to oil fume, dust and water splash, suitable for all kinds of harsh workshop environments

· Field of View Range: Standard model supports 50mm-1000mm working distance, can be matched with different focus lenses to adapt to different installation space and identification range requirements

Product Comparison

Keyence SR-X series provides a variety of models to meet different production line requirements, the main parameters comparison of common models is as follows:

Model Matching Recommendations

According to different application scenarios, we provide the following matching recommendations to help you choose the most suitable product:

· Small batch trial production or low-speed production line (speed ≤ 60m/min)

It is recommended to match SR-X100 with standard bracket, which can meet the basic identification requirements, and the cost is more advantageous.

If there are more DPM codes on the production line, it is recommended to upgrade to SR-X300 directly to avoid the problem of low recognition rate caused by insufficient algorithm capability.

· Mass production high-speed line (speed 60-300m/min, need to identify DPM codes)

Keyence SR-X300 is the most cost-effective choice, matching the polarizing filter accessory can effectively solve the problem of reflection on the surface of metal parts, and matching the dedicated IO extension module can connect multiple external sensors to achieve synchronous trigger with the production line.

· Large workpieces or multi-station integrated identification

It is recommended to use SR-X300 with SR-X series mounting bracket adjustment kit, or upgrade to SR-X800 for 5 megapixel large field of view identification, which can reduce the number of code readers installed and save system integration costs.

· Traceability system for automotive and aerospace parts

We recommend matching SR-X300 with Keyence's dedicated N-Link gateway module, which can directly upload code reading data to the enterprise MES system, support data storage for more than 10 years.

Common Application Cases

Automotive Engine Part DPM Traceability

A joint venture automotive engine factory originally used ordinary code readers, the recognition rate of laser engraved QR codes on the surface of aluminum alloy engine blocks was only about 92%, and there were a lot of manual rework, which affected the production line rhythm. After switching to Keyence SR-X300 matched with polarizing filter, the recognition rate increased to 99.92%, the failure of code reading per shift was reduced from more than 30 times to less than 1 time, which greatly improved the production efficiency, and achieved full traceability of each engine part from raw materials to finished products.

High-speed Sorting of Electronic Components

A SMT electronic component processing enterprise needs to identify the tiny 3mm × 3mm DPM code on the surface of the chip packaging during the sorting process, the production line speed reaches 180m/min, the original entry-level code reader can not keep up with the speed, and the missed recognition rate is high. After using SR-X300, the decoding speed of 600 codes per second fully meets the high-speed requirements, the missed recognition rate is controlled below 0.05%, and the sorting efficiency is increased by 45%.

About Floating Light Automation

Floating Light Automation as an authorized industrial automation product distributor of Keyence in the Asia Pacific region, has a stable long-term supply channel for the SR-X300, the specific supply capacity guarantee is as follows:

· Stock Status

We maintain a long-term stock of 80+ sets of standard configuration SR-X300 in our warehouses in Shanghai, Singapore and Los Angeles, which can be shipped within 24 hours after receiving the order for standard models.

For non-standard matching with special lenses or additional modules, the delivery cycle can be controlled within 7 working days.

· Source Guarantee

All SR-X300 products sold by us are original new products from Keyence's official production line, each product has a unique serial number consistent with the ex-factory certificate, supports official verification of Keyence worldwide, and we provide 12 months of official free warranty service, completely consistent with the service obtained when purchasing directly from the official.

· Bulk Supply Capacity

We can undertake bulk orders for new production line construction and equipment upgrading of large manufacturing enterprises.

For orders of more than 50 sets, we can coordinate the factory to give priority to production and delivery, and the maximum monthly supply capacity can reach 200 sets, which can fully meet the demand of large-scale intelligent transformation of production lines.

· After-sales Support

We have professional automation engineers who can provide free technical support including installation guidance, debugging and algorithm parameter optimization for customers.

We can also provide door-to-door debugging service for large projects within the Asia Pacific region.

Ordering Information

Floating Light Automation provides global delivery service for Keyence SR-X300, supports multiple trade terms including FOB, CIF, DDP, and supports a variety of payment methods.

If you need to get the latest quotation, product sample testing or technical solution customization, please contact our customer service team through the contact information on this website, we will reply to you within 1 working day.

FAQ

Q: Which barcode symbologies does the SR-X300 support?

A: It supports a wide range of symbologies:

2D codes: QR, MicroQR, DataMatrix (ECC200), PDF417, MicroPDF417, Aztec Code, Maxi Code, DotCode, etc.

Barcodes: CODE39, CODE128, GS1-128, CODE93, JAN/EAN/UPC, ITF, NW-7 (Codabar), Pharmacode, etc.

Q: How does the SR-X300's autofocus work?

A: The SR-X300 utilizes liquid lens autofocus technology, allowing the focal position to be adjusted automatically during installation and setup.

It eliminates the need for manual focusing, enabling rapid acquisition of clear images across varying distances and product heights, which significantly reduces changeover time.

Q: How do I select the lighting mode?

A: The SR-X300 is equipped with three built-in lighting modes:

Direct: Standard lighting suitable for most barcodes.

Polarized: Effectively filters out glare from highly reflective surfaces, such as metal.

Diffused: Reduces interference caused by uneven reflections on the barcode surface.